大气中子诱发复杂航电系统SEE的试验评价与防护设计

研究了国外单粒子效应对航电系统影响的历史进展，介绍了航电系统单粒子效应试验评价中子辐射源、试验硬件、试验方法、试验程序及评估方法5个方面。国际航空标准根据航电系统的重要程度将其定义为A、B、C、D、E五级。为了确保A、B和C级航电系统的可靠性，提出了涉及顶层项目管理至元器件控制各个层面的防护过程，优化系统设计，以适应大...     

一种修正的Osher通量在高阶WCNS中的特性

将一种基于多维修正的Osher通量运用于高阶加权紧致非线性格式(WCNS)中,该修正通量主要在垂直于激波面的界面上增加耗散,能够改善Osher通量的激波捕捉稳定性,同时对边界层和接触间断的分辨率影响非常小。对修正的Osher通量在高阶WCNS中的特性进行研究,通过数值模拟测试了基于Osher通量的WCNS的激波稳定性、热流预测精度、边界层模拟能力、激波边界层干扰模拟能力,并与Steger-Warming通量和Roe通量进行了对比。结果表明修正后的Osher通量比Harten修正的Roe通量具有更好的激波捕捉鲁棒性,而边界层、驻点热流值和激波边界层干扰的模拟则明显优于Steger-Warming通量。上述结果说明了基于修正的Osher通量的高阶WCNS具有较好的激波捕捉特性、热流预测精度和边界层计算能力。     

飞秒激光能量密度对镍基合金重铸层和加工效率的影响

以航空发动机叶片制孔为导向,结合飞秒激光对单晶镍基高温合金材料的非热熔性损伤阈值(Φth1)和热熔性损伤阈值(Φth2)特征,研究了飞秒激光能量密度(0Φ44.2J/cm2)对制孔重铸层和加工效率的影响规律。研究结果表明:在Φth1ΦΦth2时,镍基合金经飞秒激光加工后加工侧壁没有出现明显的重铸物;在ΦΦth2时,加工侧壁开始出现重铸物,并随着能量密度的增加,重铸层厚度增大。在试验结果的基础上,建立了飞秒激光单脉冲加工深度与能量密度的定量关系。能量密度越高,飞秒激光单脉冲加工深度越大,加工效率越高。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

Diurnal and seasonal variations in long-term changes in the E-layer critical frequency

Long-term changes in the E-layer critical frequency, foE, at three stations of the European region (Juliusruh, Slough and Rome) and also at Moscow and Wakkanai stations are analyzed by the method developed by the authors and described in detail in the previous papers. It is found that Juliusruh and Slough stations demonstrate a well-pronounced change in foE (a trend) during two previous decades. At the same time, the same features of the behavior of the aforementioned trend k(foE) are obtained. The trend is positive and negative in the morning and evening hours, respectively. Similar diurnal behavior of k(foE) is found also for Moscow station but with lower absolute values of the trends. A well-pronounced seasonal behavior of k(foE) is detected at Juliusruh and Slough: the trend is minimal and maximal in the summer period and at the end of fall—beginning of winter, respectively. The maximal amplitude in the morning hours reaches +0.04?MHz per year, whereas the minimal amplitude in evening hours is ?0.06?MHz per year. No systematic changes exceeding by the magnitude 0.01?MHz per year are found for Rome and Wakkanai stations. It is assumed that the observed trends are related to changes (trends) in the meridional wind bringing NO molecules from the auroral oval to lower latitudes.     

扩压叶栅剪敏液晶试验与图像处理

基于剪敏液晶涂层(SSLCC)材料的光学特性,发展了适合于内流场狭小空间环境下的SSLCC边界层流动显示技术:设计并加工了微型摄像头-发光二极管(LED)组合式图像采集设备解决拍摄光路问题;基于二维SSLCC图像与三维模型的空间映射关系,建立了真实模型的三维重构方法;通过SSLCC图像光谱Hue色相值转化,实现了液晶图像信息的定量分析。以西北工业大学高亚声速平面叶栅风洞为平台,开展了某扩压叶栅吸力面边界层流态的剪敏液晶流动显示试验。结果表明:所发展的剪敏液晶显示技术可进行叶栅内流场边界层的流态测量;所建立的图像处理方法可为边界层流动特征的辨识及其特征位置确定提供技术支撑;在来流马赫数为0.12、攻角为0°的条件下,叶片吸力面边界层沿流向依次经历了层流边界层分离、再附着及转捩为湍流状态的过程,且边界层的发展受叶栅角区分离流动影响,造成其前缘分离区减小,再附着点和边界层转捩位置向前缘移动。     

二氧化硅过渡层表面开口孔面积对层合玻璃力学性能影响

研究二氧化硅过渡层表面开口孔的大小对航空层合玻璃力学性能的影响.利用扫描电镜测试分析多孔二氧化硅过渡层的表面开口孔形貌,利用万能试验机测试含多孔二氧化硅过渡层的层合玻璃中无机玻璃/聚氨酯界面的剪切强度.以实验获得的开口孔形状为依据,以ANSYS软件建立含多孔二氧化硅过渡层的层合玻璃有限元实体模型,模拟获得不同孔面积条件下的多孔二氧化硅/聚氨酯界面的张应力.结果表明:随着多孔二氧化硅孔面积的增加,层合玻璃中无机玻璃/聚氨酯界面的剪切强度先迅速增大后缓慢降低;当单孔面积为52.61 μm2时,制备的层合玻璃有较好的力学性能.     

离散粗糙元诱发边界层转捩的实验研究

针对直升机转子叶片模型表面离散粗糙元诱发边界层转捩问题开展了实验研究,分析不同雷诺数下粗糙元尺寸参数对转捩位置的影响。实验在中航工业气动院直升机转子叶片模拟装置进行,在模型转子叶片表面布置不同尺寸的离散柱状粗糙元,利用红外热像技术探测边界层转捩,并提出一种基于湍流／层流区域面积比的转捩位置判定准则,目的是实现边界层转捩位置自动识别,进而分析粗糙元尺寸参数对转捩位置的影响。实验转速为300至600 r／m,对应叶尖切向速度为25～40 m／s。实现了对旋转叶片边界层转捩位置的定量测量,通过实验验证,转捩位置判定算法正确可靠,初步得到了不同高度 DRE 诱发转捩位置与雷诺数之间的关系,随着粗糙元高度的增加,转捩位置逐渐靠前。     

CARDC 激波风洞 TSP 技术研究进展

从基本原理、关键技术和验证应用三个方面总结了近两年在中国空气动力研究与发展中心激波风洞中开展的温敏涂层(TSP)技术相关研究工作。通过解决快速响应温敏发光材料研制、模型研制、数据处理等一系列关键技术,完成图像采集系统、光学系统及标定系统的配套和系统集成,建立了一套适于激波风洞试验的高速 TSP 测量及标定系统。该技术可在激波风洞试验中获取模型被测面温敏涂层的发光图像,基于该图像可以直接观察模型表面热流分布和捕捉峰值热流的准确位置。结合温敏发光材料的物性参数标定数据,能够实现对模型表面热流的定量测量。不同于传统的传感器点热流测量技术只能得到模型表面有限数量的离散点的热流值,TSP 技术能够以高空间分辨率得到较大面积区域的详细热流分布信息,可更加全面的测量模型外表面的热环境,并且可以据此进一步分析和辨别边界层流态以及确定边界层转捩位置。试验对比表明,TSP 技术的测量结果与点热流传感器的测量结果具有良好的一致性。目前该技术已趋于成熟,在Φ2 m 和Φ0.6 m 激波风洞上成功应用于边界层转捩研究、局部干扰区热环境研究和复杂外形飞行器热环境研究等领域,已成为激波风洞除点测热技术之外又一重要测热技术。